ESAB Origo Feed 30 Manuel d'instructions télécharger pdf (Page 24)

2) DESCRIPTION

2.1) General description

The Origo Feed 304 wire feeders are designed for semi-automatic MIG/MAG welding with solid wires,

cored and aluminium in services of average and heavy production.

They have a progressive wire mechanism of 4 feed rollers engaged and an electronic control system.They

can be installed on the power source, hanged on the workplace with appropriate hangers or on a wheel kit to

move it around the workplace (optional). According to the model it has several functions, please see the

technical characteristics.

™

3) TECHNICAL CHARACTERISTICS

4) CONTROLS

P2/P3

4.1) Front panel

4.2) Side console

1) Knob for setting wire feed speed.

2) Knob for setting the voltage.

3) Digital voltmeter/ amperimeter. To display the parameters of welding, voltage and current. After the

welding it maintains the set values shown on the display (optional in P2).

4) Connection for welding gun.

5) Burnback - Burnback time is a delay between the time when the wire starts to brake until the time when

the power source switches off the welding voltage.Too short burnback time results in a long wire stickout

after completion of welding, with a risk of the wire being caught in the solidifying weld pool. Too long a

burnback time results in a shorter stickout, with increased risk of the arc striking back to the contact tip.

Optional

Ye s

17 17.3 18

Ye s

Optional

0 - 0.5

270 x 550 x 340 (without bobbin cover)

270 x 660 x 415 (with bobbin cover)

TABLE 3.1

Powersupply (V - Hz)

Wire feed speed (m/mm)

Wire diameter (mm)

Solid steel

Cored wire

Aluminium

Weldinggun connection

DigitalVoltmeter/amperimeter

2/4 Stroke

Weldingsource voltagesetting

Manual feeding of the wire

Double setting

Remote control

Bobbin cover

Burnback (sec.)

Dimensions (WxLxH)(mm)

Weight(kg)

Wire feeder 304 P2 304 P4304 P3

42 - 50/60

1.5 - 25.0

0.6 - 1.6

0.9 - 3.2

0.8 - 1.6

Euro-conector

Origo Feed 304 P2

™

Origo Feed 304

™

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

ESAB Origo Feed 30 Manuel d'instructions Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Système de soudage ESAB Origo Feed 30